T4 Transfer Pump With Pro Connect
Transfer Pumps are required to move A and B materials to the Reactor.
The T4 Transfer Pump combines Graco’s proven Merkur® air-motor and carbon steel pump lower. The T4 is a 3:1 ratio pump with ProConnect technology – allowing you to quickly connect and disconnect the air motor from the pump lower.
-
Quick Transfer Between Drums – quickly change to a new drum of material without the mess of dripping chemical by using multiple pump lowers.
-
Easier to Maneuver – easily transfer the T4 pump between drums by quickly disconnecting the air motor from the lower before transferring. This makes the pump lighter weight and reduces the necessary ceiling height of your rig.
-
Eliminate Downtime – get up and running quickly when your pump lower requires maintenance by having a spare pump lower that can easily be installed.
T3 Pump with 3:1 Pressure Ratio
Transfer Pumps are required to move A and B materials to the Reactor Spray Systems. The T3 Transfer Pump combines Graco’s proven Merkur air-motor and popular T2 stainless steel lower. The T3 is a 3:1 ratio pump – using less air pressure to provide the same fluid pressure required.
-
Easier to manoeuvre - The overall height of the T3 is 9.4 cm (3.7 in.) shorter above the drum than the T2, making it easier to remove from the drum inside of a spray rig.
-
More quiet – Studies show the T3 Transfer Pump is about 3x more quiet than the T2 Transfer Pump.
-
Less maintenance - the Merkur air-motor is based on air pilot valve technology. The air-motor switching is purely pneumatic. This differs from T1 and T2 Transfer Pumps, which use a mechanical reversing mechanism in the air-motor.
T2 Pump With 2:1 Ratio
Graco's family of transfer pumps maintain performance in any environment. Transfer pumps are required to feed chemical to your Reactor spray machine or any other equipment requiring fluid transfer. Consider your material viscosities, desired output rate, interior ceiling height of your rig, and available air pressure when choosing your ideal transfer pump.
Ideal for moving A and B materials to Reactor spray machines.
-
Provide consistent feed pressures and flow rates for dependable results
-
Lower pressure drops with higher viscosity materials at any ambient temperature
-
Designed and manufactured by the worldwide leader in pump technology
-
Longer lasting pump - designed for durability with less maintenance
-
Stainless steel wetted parts for corrosion-resistance
-
PTFE seals for improved performance and less maintenance
2:1 Ratio T1 Transfer Pump
Graco's family of transfer pumps maintain performance in any environment. Transfer pumps are required to feed chemical to your Reactor spray machine or any other equipment requiring fluid transfer. Consider your material viscosities, desired output rate, interior ceiling height of your rig, and available air pressure when choosing your ideal transfer pump.
Ideal for moving A and B materials to Reactor spray machines.
-
Provide consistent feed pressures and flow rates for dependable results
-
Lower pressure drops with higher viscosity materials at any ambient temperature
-
Designed and manufactured by the worldwide leader in pump technology
-
Longer lasting pump - designed for durability with less maintenance
-
Stainless steel wetted parts for corrosion-resistance
-
PTFE seals for improved performance and less maintenance
HUSKY 716/1050 AIR OPERATED DOUBLE DIAPHRAGM PUMP/1050 AIR OPERATED DOUBLE DIAPHRAGM PUMP
The Husky 716 air-operated diaphragm pump features an external controller for remote control capabilities.
-
Centre and end porting options
-
No mechanical seals which causes fluid leaks or failures
-
Easy-to-service air valve and ball checks
-
19.05 mm (3/4 in.) centre- and end-porting
-
No seals to leak or fail
-
Quiet running less than 85 dBa with easy-to-use remote muffler
-
Easy-to-service air valve and ball checks
